Step 1 - Begin by folding a piece of card.  Here I have used an A4 Piece of card and folded it half.

Step 2 - Open your card so you are looking at the inside and draw the shape you wish to cut out for the 'shaker' section. You can use stencils or draw free hand.

Step 3 - Using a craft knife or a shape cutter cut your shape out.

Step 4 - Turn your card over and decorate.

Step 5 - Once decorated, open up the card again.  Place double sided tape around the cut out shape and attach some acetate to cover the hole.

Step 6 - Once the acetate is in place turn the card back over to the front and place peel offs or ribbon around the cut out shape to frame it.  At this point you may want to add any extra embellishments such as ' happy birthday' etc.

Step 7 - Open the card again and place 3D foam all around the acetate. Try to place it as close to the edge as possible as this will mean you can use fewer beads in your 'shakers'.

Step 8 – Choose a piece of paper to use for the background of your window.

Step 9 - Place double sided tape around the edges of the inside of the card

Step 10 – Remove the backing from the double sided tape and 3d foam and carefully pour in your beads. You could also use small confetti, or punched out paper shapes

Step 11 – Carefully place your chosen paper over the top, taking care to press down around the window and the edges of the card. Once secure trim the paper down to fit the size of your card.

Step 12 – Your finished ‘shaker card’